subaru impreza oil reset subaru impreza wrx subaru impreza hatchback subaru cars

2013 subaru impreza oil reset

Log in or sign up to leave a comment

level 1

none of these worked for me and mine doesn’t have an i/set switch either. :(

level 2

It was the low oil sign. Turns out this car does not have a change oil light.

level 1

What oil change alert? I don’t believe they exist on a 14 Impreza. If you’re referring to the yellow oil light, that is the low oil indicator. I can give you directions on how to reset that if you like.

level 2

I think your right I drove around and the light never came on, it must have been a low oil light.

level 1

Just had this happen in my 2012 same steering set up and no I/set. I read drive around for 10-30 miles but I disconnected the battery let it chill for 10 mins and hooked it back up then waited another 10 and it worked. As long as it's the low oil and not pressure that should work. Just make sure you have oil in the car.

level 2

Thanks, but I’m also missing the select switch used in the video.

Last Updated on December 16, 2020 by Christ

Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021) – The Subaru Impreza is a compact sedan produced by the Japanese company Subaru, which came off the assembly lines for the first time in 1992. The fourth generation of the Impreza was presented at the 2011 New York Motor Show.

The engines available are both petrol and diesel with displacements between 1.6 and 2.0 liters. Initially intended for the Japanese and US markets, the fourth series was subsequently exported to other European markets, except in Italy with the exception of the WRX and STI.

Contents

  • 1 Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021)
    • 1.1 4th Generation (GJ GP)
      • 1.1.1 2012-2014 Model Years
      • 1.1.2 2015-2016 Model Years
    • 1.2 5th Generation (GK GT)

Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021)

When the preset maintenance period arrives, a notification screen will be displayed. You must change the corresponding maintenance item’s setting after performing an oil change or maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the maintenance light on the 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Subaru Impreza:

4th Generation (GJ GP)

For this fourth generation model, you can reset the maintenance light through the multi function display. There are 2 ways to do this, depending on your vehicle model year, here’s how to reset it:

2012-2014 Model Years

Time needed: 7 minutes.

Follow these instructions if your vehicle is made in 2012 2013 2014:

  1. Place the ignition to the ON position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Go to the SELECTION screen by using the ▲ or ▼ button

    The button is located on the steering wheel

  3. Pull and hold the ⓘ/SET button to enter the menu

    Pull the button for 3 seconds

  4. Select MAINTENANCE

    Use the ▲ or ▼ button to scroll and pull ⓘ/SET to select

  5. Select MAINTENANCE SCHEDULE or ENGINE OIL

    In this menu you can set a maintenance reminder at a specific interval by adjust the Notification Date or Notification Distance

  6. Select SET when you finish setting up

    Done!

2015-2016 Model Years

  • Place the ignition to the ON position without starting the engine
  • Go to the SETTINGS screen by using the ▲ or ▼ button

  • Hold down the ENTER button to enter the menu
  • Select MAINTENANCE
  • Select MAINTENANCE SCHEDULE or ENGINE OIL
  • Select SET when you finish setting up

5th Generation (GK GT)

This is the latest generation of the Subaru Impreza. Just like the previous generation, you can set the maintenance minder at a specific interval through multi function display. Here’s how to do it:

  • Place the ignition to the ON position without starting the engine
  • Go to the SELECTION screen by pressing the INFO button repeatedly
  • Pull and hold the ⓘ/SET button to enter the menu

  • Select MAINTENANCE by using the ▲or▼ button to scroll and pull the ⓘ/SET button to select
  • Select MAINTENANCE SCHEDULE or ENGINE OIL
  • Select SET when you finish setting up

 Repeat this guide to reset Oil Filter or Tires if needed.

These instructions are based on the Subaru Impreza owner’s manual. This procedure should apply to the fourth and fifth generations of the Subaru Impreza (2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021) can solve your problem. Good Luck!

How to reset the oil light on a Subaru Impreza?

In this section, we’re going to reset the oil service light in the Subaru Impreza. Everything’s going to be through the little center display with the buttons on the steering wheel. So all you got to do is: If your vehicle has an ignition button, press the Start/Stop button twice without step on any pedal

How do you change the maintenance button on a Subaru Impreza?

So you’re going to hold the INFO button down and that screen is going to change Once it does you’ll go down to where it says MAINTENANCE by using the ▼ button and then pull the SET button as a select button For your info, this operation work for the fifth generation of the Subaru Impreza (2017, 2018, 2019, 2020, 2021, 2022 model years).

What kind of engine does a Subaru Impreza have?

The Subaru Impreza is a compact car that has been manufactured by Subaru since 1992. It was introduced as a replacement for the Leone, with the predecessor’s EA series engines replaced by the new EJ series. It is now in its fifth generation.

How long does it take to change an oil change?

Anyway, I would recommend doing your regular oil changes. That’s the best thing you can do for your engine as well as the fuel filters are a good thing to keep the fuel and the oil in good shape for these vehicles, and they’ll run for a long, long time. So let’s hop over to it. Time needed: 3 minutes.

How do you reset the oil light on a 2013 Subaru Outback?

To perform a oil light reset on the 2013 subaru outback, turn the ignition to on, move the controls on the left hand side until you get to the maintenance menu, pull out iset to reset the light.

Related Posts

Thompsons water seal timber oil cedar transparent
Avon advance techniques moroccan argan oil shampoo
Oil filter for a 2011 chevy traverse
Olive oil cream moisturizer dry hair and scalp therapy
Ors olive oil butter whipped leave in conditioning creme

Toplist

Latest post

TAGs