TOP 20 NETWORK ADMINISTRATOR INTERVIEW QUESTIONS AND ANSWERS
Being a network administrator comes in handy with a responsibility or task to perform. Due to that here are some top 20 interview questions and answers that is always likely to be asked during an interview section.
Question #1
Can you tell us about yourself?
This question is the most important not only because it’s the very first question of your interview but the only
opportunity to sell yourself as the best candidate for the job. You have to make sure that this answer is tailored to the position at hand; meaning only talk about yourself in the relevance to this position. Talk about your past experience in IT and stay away from irrelevant personal stuff. Stick to the fact about yourself because if you say something that is not true, the interviewer may follow up with a question that you can’t answer.
Question #2
What is a
Firewall?
Firewall prevents connection between two or multiple source; it basically blocks any incoming or outgoing traffic. Firewall can be in software or hardware forms.
Question #3
What is TCP/IP?
TCP is a Transmission Control Protocol that deals with establishing a connection between computers before any data is being sent; in other words, it acts as the highway for data packets being sent back and forth used by various Protocols
like HTTP or FTP. TCP also sorts out data receive order.
Question #4
Can you explain the difference between HTTP and HTTPS?
HTTP stands for HyperText Transfer Protocol used by majority of websites as means of transmitting website data and it allows for use of hyperlinks. This Protocol mostly uses TCP port 80 while HTTPS is a secure version of HTTP that allows for identity verification and low level encryption using TCP port 443.
Question
#5
What is a proxy or proxy server?
Proxy deals with filtering network traffic in a sense of preventing access to certain websites and can even monitor user web activity. To put it simply, it can block certain website from being accessed but it can also act as a measure of hiding the true origin in point of access.
Question #6
Can you explain what UDP is?
UDP Stands for User Dat agram Protocol. Unlike TCP, UDP is
constantly broadcasting a connection signal which can allow for faster connection speeds-with TCP you have to wait for connection confirmation which takes time. UDP sends out data without consideration of what is receiving it; sort of like Radio signal.
Question #7
What is the loopback IP Address?
The loopback IP address is 127.0.0.1. As part of troubleshooting network connection issues; it is used to test Network Interface Card for functionality.
If you ping this ip address and it completes successfully it means your hardware is okay.
Question #8
What is DHCP?
DHCP stands for Dynamic Host Configuration Protocol. The main function of DHCP is to hand the distribution of IP address on a network. IP address assigned by DHCP server is “Dynamic”, meaning that they are leased and released dynamically. To explain it further, if you connect a PC to a network it will get a leased IP address and if
you disconnect or move the PC- it will be assigned a different one.
Question #9
What is FTP/ and port used?
FTP is a file transfer Protocol used to transfer large files between computers with built in ability to pause transfer of data. Ports used by FTP are 20 and 21.
Question #10
What is SSH/ and port used?
Also known as Secure Shell; is used to establish a secure connection between devices which can
be anything from computers to switches. For example; you can use SSH at a café and connect to any device anywhere; by establishing a configured Secure Shell tunnel between two devices. Making the connection secure.
Question #11
What is the maximum length of UTP cable allowed?
The maximum length of UTP is 90 to 100 meters for a single segment connection. If you have a switch or a repeater it can compensate for this limitation.
Question
#12
What are the layers of OSI model and how many?
There are 7 layers of OSI model; Physical Layer, Data Link, Network, Transport, Session, Presentation and Application.
Question #13
What is the job of Network Layers?
A text book answer for this question is; the Network Layer deals with routing, switching and transmitting of data from one point to another, but this layer is also responsible for error handling and
packet sequencing.
Question #14
Can you name different types of network cable?
Cat-5 runs 100Mb/s maximum, Cat-5e can run up to 1Gb/s, and Cats-6 can run up to 10Gb/s connection speed. All cables are limited to meters’ distance in order to run at optimum speed.
Question #15
What is a Subnet Mask?
Subnet Mask dictates the size of a network and also tells which part of the subnet our host IP address belongs to. Basically you can have
multiple sub network for given IP address range.
Question #16
Can you tell me the difference between a Workgroup and a Domain?
With a Workgroup you have a collection of systems that are connected to the same network but have their own set of rules and permission set at local level. With a Domain you have a group of systems that are bound by the rules of centralized authentication server. In a Domain each system has to connect through the Domain
server using provided credentials.
Question #17
How would you determine connection path between local host and a server?
A “TRACERT” command is used to accomplish this test. Similar to “ping” command with addition of letting us visualize which routers or switches are used to connect in reaching of our destination. Used for troubleshooting dead connections.
Questions #18
Can you explain IPCONFIG?
Ipconfig command is used to determine TCP/IP settings, DHCP configuration, DNS, Default Gateway, and Subnet Mask. It can also be used to change Local DHCP settings; for example, ipconfig/release and /renew….
Question #19
What is VPN?
A Virtual Private Network allows users to create a secure connection over public network such as internet. This is commonly used by mobile workers in order to access company’s network from remote locations.
Question
#20
Why should we hire you?
Just as important as the very first question on this list; this is your last chance to tell this employer why you are the best choice for this position. You should talk about your experience and how you could use that to benefit the company. Don’t be afraid to exalt yourself without coming of as egocentric; be polite and smile.
NOTE: As a bonus advice; before going for an interview make sure you do
research about the company you have the interview with. The main reason for this is multiple interviews in which one may be with Human Resources.
Truth be told, there are countless questions that you may come across and is almost impossible to know which one…. I hope this article gives you the confidence that you may need in order to get this awesome job. Good luck to you all, and have wonderful day. 🙂