Show
Can I use Type F transmission fluid in my 2014 Your Answer: Looking for a Used Focus in your area?CarGurus has 8,279 nationwide Focus listings starting at $1,555. Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies. For 2012 Focus Sedan Third generation (MK3) Ford recommends to use: WSS-M2C938-A automatic transmission fluids. To select the right automatic transmission fluid see the table below. How much automatic transmission fluid you need to put into 2012 Focus Sedan depends on conditions listed below. in your garage to make future searches easy. expand_moreAll modifications expand_more6F35 gearbox
Without special equipment it is possible to replace only ATF in the AT pan because of the way automatic transmission in 2012 Ford Focus Sedan has been designed. It will take about 30–90 minutes depends on your skill level and might save you up to $200 depends on the region you live in. With a spanner or a retched with the right size head unscrew the refill plug and the drain plug. After that drain old AT fluid. If you want to replace the filter you need to remove the ATF pan, replace the filter and then install the ATF pan back with a new gasket. Screw back the drain plug with a new gasket and refill the transmission with new ATF. Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 Ford Focus Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind. Before doing any DIY service please check your insurance policy and Ford warranty policy for your region. In some regions DIY service may invalidate your warranty. We've detected some suspicious activity coming from your IP address and have temporarily blocked it as a security precaution. Please check the box to let us know you're human (sorry, no robots allowed). How much transmission fluid do I need for a 2012 Ford Focus?A 2012 Ford Focus transmission flush also uses about 10 quarts of fluid to fully clean and flush out the system.
What kind of transmission fluid does a Ford Focus?Lubegard Synthetic Transmission Fluid Dexron VI 1 Quart.
Where do you check the transmission fluid on a 2012 Ford Focus?If you have the typical automatic transmission (model year 2012 or older) your Ford Focus should have a transmission fluid dipstick. It is located at the front of the engine compartment under the hood, close to the air filter housing.
How much transmission fluid does a Ford Focus take?The Chiltons manual says the trans capacity is 6.7 quarts and 3.1 quarts if you drop the pan and change filter.
|
2012 ford focus automatic transmission fluid type
Related Posts
Copyright © 2024 kemunculan Inc.
