GENERAL DISCLAIMER - PLEASE READ!The following engines on this page have some similar specifications as your SCAG SFZ48-26BS's engine. Although any of these engines may not be exactly (100%) the same as for your SCAG SFZ48-26BS's engine , we feel very confident and are doing our best from our many years of experience to
show you the closest engines we have in stock that have some similar specifications as your original engine, such as crankshaft diameter and length and mounting bolt pattern that may work for your equipment. Your exact original engine may not be available because it may: be too old to be in production or discontinued due to some EPA regulations. Our customers may had bought any of these engines from us and may had done some modifications to adapt to work with their equipment
including, but not limited to: transferring the wire harnesses from their old engines to the new engines, tappering the mounting holes, drilling new mounting holes on mower's decks, cutting and welding mufflers, ...etc. Although we spent a lot of time to prepare, review and compose this page, the information here may not be 100% accurate as we collected them from our experience and from our customers on the daily basis. You should replace your old engine with the same brand, type, and
series, specifications to avoid major modifications. Please contact us first if you have any questions or want to confirm before purchasing. We are here to help! SCAG SFZ48-26BS with: BRIGGS & STRATTON 44P777-0117-E1Our engines on this page have the following similarities. Choose the engine HP and the displacement (cc) accordingly to fit your needs:
Other minor things that you may have to do when you buy the long block to replace your engine including but not limited to: transfer your wire harness from your old engine to the new one if it is not the same (most of these have similar wire harness though), tap/thread the mounting holes (as most of brand new engines did not have the mounting holes threaded/tapped by the manufacturer) etc..
How do I identify my Briggs and Stratton engine?How Do I Identify a Briggs & Stratton Engine? The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.
How much oil does a 26 horsepower Briggs & Stratton engine hold?Oil Capacity 60 fl.
How do you tell what year my Briggs and Stratton engine is?The engine's code number indicates the exact date it was manufactured. This system provides an easy way to determine the age of your small engine. The following is an example of interpreting the date for the code number 99011556: The first two digits (99) denote the year of manufacture.
|