How to turn off replace filter light on kitchenaid refrigerator

To Dispense Ice:

1. Press the button to select the desired type of ice.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

2. Press a sturdy glass against the ice dispenser pad. Hold the

glass close to the dispenser opening so ice does not fall

outside of the glass.

IMPORTANT: You do not need to apply a lot of pressure to

the pad in order to activate the ice dispenser. Pressing hard

will not make the ice dispense faster or in greater quantities.

3. Remove the glass to stop dispensing.

NOTE: Ice may continue to dispense for up to 10 seconds

after removing the glass from the pad. The dispenser may

continue to make noise for a few seconds after dispensing.

Dispenser Tray with Water Level Indicator

(on some models)

Your dispenser may include a small tray at the bottom of the

dispenser. It is designed to catch small spills and allow for easy

cleaning. The tray can be removed from the dispenser and

carried to the sink to be emptied or cleaned.

NOTE: There is no drain in the tray. When the tray is full of water

and needs to be emptied, a small red indicator pops up at the

back of the tray.

Dispenser Light (on some models)

When you use the dispenser, the light will automatically turn on.

If you want the light to be on continuously, you may choose either

ON or AUTO.

ON: Press LIGHT to turn the dispenser light on.

AUTO: Press LIGHT a second time to select AUTO mode. The

dispenser light will automatically adjust to become brighter as the

room brightens, dimmer as the room darkens.

OFF: Press LIGHT a third time to turn the dispenser light off.

The dispenser lights are LEDs that can not be changed. If it

appears that your dispenser lights are not working, be sure that

the light sensor is not blocked (in AUTO mode). See

"Troubleshooting" for more information.

Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid

unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the product,

to the ice maker, or to the dispenser light. It simply deactivates

the ice and water dispensers. To turn off the ice maker, see "Ice

Maker & Storage Bin."

Press and hold LOCK for 3 seconds to lock the dispenser.

While the dispenser is locking, "LOCKING" will appear on the

display screen and the blue indicator light around the LOCK

button will flash. When the dispenser is locked, the indicator

light will change to red for a few seconds, then turn off.

Press and hold LOCK a second time to unlock the dispenser.

While the dispenser is unlocking, "UNLOCKING" will appear

on the display screen and the red indicator light around the

LOCK button will flash. When the dispenser is unlocked, the

indicator light will change to blue for a few seconds, then turn

off.

Water Filter Status Light (on some models)

The water filter status light and display screen help you know

when to change your water filter. Press the FILTER button to

check the status of your water filter.

If the filter is new:

You must press FILTER to view the filter's status. For a few

seconds, the status light will be blue and the display screen will

show what percentage of your filter's life remains.

If it is almost time to change the filter:

The status light will automatically illuminate and will remain on,

appearing yellow. The words "ORDER FILTER" will appear on the

display screen. Press FILTER to see what percentage of your

filter's life remains. You should order the appropriate replacement

filter. See "Accessories."

If it is time to change the filter:

The status light will remain on, changing to red. The words

"REPLACE FILTER" and "HOLD BUTTON TO RESET" will appear

on the display screen until the filter has been changed and the

status light has been reset.

To reset the water filter status light:

After changing the filter, reset the status light by pressing and

holding the FILTER button for 3 seconds. The status light will

blink red and change to blue, then turn off when the system is

reset.

(on some models)

The water filter indicator, located on the control panel, will help

you know when to change the water filter.

A new water filter should display a reading of 99%. The reading in

the display will decrease as the filter life is used. A replacement

water filter should be ordered when "Order Filter" is displayed. It

is recommended that you replace the filter when "Change Filter"

is displayed or when water flow to your water dispenser and/or

icemaker decreases noticeably. See "Changing the Water Filter"

later in this section.

After changing the water filter, press and hold RESET for

2 seconds until the status display changes to 99%.

9

Where is the reset button on a KitchenAid refrigerator?

How do I reset my KitchenAid French door refrigerator?