How to connect hp deskjet 2732 to wifi

To set up a printer for the first time, remove the printer from the box, connect the power cord, add printer to HP Smart, load paper, install the ink cartridges, and complete setup.

Note:

If you are looking for the printer software, go to 123.hp.com.

Remove the printer from the box

Remove the printer from the box, and then remove all tape, stickers, and packing materials.

CAUTION:

To avoid setup problems and potential printer damage, make sure all internal packing material is removed, all doors are closed and trays reinserted before turning on the printer.

1. Remove the printer from the box.

2. Remove all tape and packing materials from the outside of the printer.

3. Lower the output tray, and then remove the tape from the cartridge access door.

4. With the cartridge door open, remove all tape and cardboard from inside the printer.

5. Close the ink cartridge access door.

6. Remove all hardware and materials from the box.

7. Recycle the box and packaging materials.

Connect the power cord

Plug the printer into an electrical outlet, and then turn on the printer.

Note:

Do not connect a USB cable at this time. The connection to the computer is established during the software installation.

1. Connect the power cord to the back of the printer and into an electrical outlet.

2. Press the Power button.

3. Wait until the printer is idle and silent.

Add the printer to HP Smart

The HP Smart app is required and helps connect your device to your printer. It also guides you through the rest of the setup process.

1. Go to 123.hp.com to download and install the software.

2. Open the app, and then touch Add a New printer or touch the plus sign to find your printer.

3. Follow the prompts in HP Smart to connect the printer to your network and device.

4. Sign up for HP+ or Instant Ink.

   Note:

   This is optional and depends on country/region.

5. Follow the animation in the HP Smart app to load paper and install setup cartridges.

The steps that follow on this page can be used with the instructions in HP Smart to complete printer setup.

Load plain paper

Load plain paper in the input tray.

1. Raise the input tray.

2. Slide the paper width guide all the way to the left.

3. Load a stack of plain white paper into the input tray.

4. Slide the paper width guide to the right until it rests at the edge of the paper.

5. Lower the output tray, and then pull out the tray extender.

Before you print, make sure to select the correct paper size or media type in the print job settings.

Install the ink cartridges and complete setup

Install the HP ink cartridges that came with your printer.

1. Lower the output tray, and then open the ink cartridge access door.

2. Remove the ink cartridge from its packaging.

3. Hold the cartridge by its sides, and then remove the protective tape.

   CAUTION:

   Do not touch the copper-colored contacts or the ink nozzles, or reapply the protective tape. Touching these areas can result in an ink system failure.

4. Slide the cartridge into its corresponding color-coded slot, and then push up until it snaps into place.

5. Close the ink cartridge access door.

   The printer prints a set of information pages, including an alignment page.

6. Follow the instructions on the alignment page to calibrate the cartridges for the best print quality.

How do I connect my HP DeskJet printer to Wi

Is the HP DeskJet 2732 wireless?